ELEDA Co.,Limited
Automatic Tape Dispenser ZCUT-91 .Automatic tape Dispenser can be set according to the length of the cut, and cut off the tape straight, parallel to paste on the edge, Adhesive tape cutting length, paste the interval can be adjusted freely according to user needs
2. To operate automatic tape dispenser remove the tape at the length will come out automatically and cut

Product Description

1. Automatic tape Dispenser can be set according to the length of the cut, and cut off the tape straight, parallel to paste on the edge, Adhesive tape cutting length, paste the interval can be adjusted freely according to user needs.

2. To operate automatic tape dispenser remove the tape at the length will come out automatically and cut.

3. Size indications can be easily seen by LED displays, and operations are simple, only press the cm key or mm key to set the length.


Specifications

◇Applicable adhesive tape width: 6-60 mm

◇Applicable adhesive tape length: 5-999 mm

◇Power supply: 110V 60Hz

◇Power: 25 W

◇Size:14*11.6*21.3cm

◇Material: Anti-Static ABS


Automatic Tape Dispenser ZCUT-9 show




Features

◇The safety function and design of anti - cutting finger

◇Programmable 6 different length, preset and cycle counting functions (eg 50-60- 70-80-90-100mm, cyclic repetitive cutting)

◇Can accommodate any size inner diameter tape and the maximum outer diameter of 300 mm tape,

◇Dual sensor, one cut 2 rolls of tape
Built-in tweezers, lubricants and easy-to-use splitter plates.

◇Cut fibril tape, hard tape, acetate, glass wall paper, double side tape, Nomex, sealing rubber, scotch tape, industrial tape, masking tape, plastic adhesive tape and so on. The section not sticky material, paper tape, insulating film, aluminum foil, copper foil and so on.


Package include

◇1 x Automatic Tape Dispenser

◇1 x power cable

◇1 x instruction manual


Related Products
Hot Tags: automatic tape dispenser ZCUT-9, suppliers, manufacturers, factory, wholesale, customized, buy, bulk